NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL

Özgür ÖZGÜÇ [1]


Floating production, storage and offloading systems (FPSOs) are widely used to develop offshore oil and gas fields. FPSOs structures shall be evaluated in order to satisfy the specifications of both in-service and pre-service loading conditions. The key aspects of the structural assessment of FPSOs are the buckling and ultimate strength behaviour of plate panels, stiffened panels and hull girders. The focus of this paper is to address the buckling and ultimate strength criteria for FPSO hull structures. Buckling strength assessment of three panels in FPSO vessel is being carried out using the non-linear finite element code ADVANCE/ABAQUS, where the analyses involve both material inelastic effects and non-linear geometric effects. The capacities of the bottom panels are estimated under simultaneously acting lateral pressure and axial compression. The upper deck is only subjected to axial compression. The three panels are located in the upper deck, the inner bottom and the bottom shell. The capacities of the bottom panels are predicted under simultaneously acting lateral pressure (0.249 MPa for inner bottom and 0.146 MPa for the bottom) and axial compression. For both the bottom and the inner bottom panel the pressure acts from the ballast tank and outward. The upper deck is only subjected to axial compression. The Ultimate Limit State (ULS) capacities have been estimated to 260 MPa for the upper deck, 205 MPa for the inner bottom and 250 MPa for the bottom shell.
non-linear finite element, FPSO vessel, axial compression, lateral pressure, buckling capacity
  • [1] ABAQUS, (2014), “ABAQUS Documentation”. Dassault Systèmes, Providence, RI, USA.
  • [2] Alinia M. (2005). “A study into optimization of stiffeners in plates subjected to shear loading.” Thin-Walled Structures, 43(5):845 - 860.
  • [3] Alinia M. and Dastfan M. (2006). “Behaviour of thin steel plate shear walls regarding frame members.” Journal of Constructional Steel Research, 62(7):730 - 738.
  • [4] Det Norske Veritas (DNVGL). “Buckling Strength Analyses”, DNV Classification Notes No.30.1, July 2014.
  • [5] International Association of Classification Societies (IACS). “Shipbuilding and Repair Quality Standard”, Reprinted March 1998.
  • [6] Health and Safety Executive, (2000). “Collision resistance of ship-based structures to side impact”, OTO 053/2000.
  • [7] International Ship and Offshore Structure Congress (ISSC). (2009). “Ultimate strength. Report of Technical Committee III.1”, International Ship and Offshore Structures Congress, Seoul, Korea, August.
  • [8] Hughes O. F., and Paik J.K., (2010). “Ship structural analysis and design”. The Society of Naval Architects and Marine Engineers (New Jersey).
  • [9] Gheitasi A. and Alinia M. (2010). “Slenderness classification of unstiffened metal plates under shear loading.” Thin-Walled Structures, 48(7):508 - 518.
  • [10] Ozguc, O. (2019). “Estimation of buckling response of the deck panel in axial compression”. Polish Maritime Research, 4 (104), Vol. 26; pp. 39-46 10.2478/pomr-2019-0064.
  • [11] Rizzo N.A.S, Amante D.A., and Estefen S.F., (2014). “Ultimate shear strength of stiffened panels for offshore structures.” OMAE2014-23155, 33rd International Conference on Ocean, Offshore and Arctic Engineering; vol. 4A: Structures, Safety and Reliability. San Francisco, California, USA.
  • [12] Paik J.K. (2005). “Ultimate strength of dented steel plates under edge shear loads.” ThinWalled Structures, 43(9):1475 – 1492.
  • [13] Paik, J.K., Lee, J. M., and Lee, D. H. (2003). “Ultimate strength of dented steel plates under axial compressive loads.” International Journal of Mechanical Sciences, 45:433-448.
  • [14] Paik J. K., Thayamballi A.K., and Kim B.J. (2001). “Advanced Ultimate Strength Formulations for Ship Plating Under Combined Biaxial Compression/Tension, Edge Shear, and Lateral Pressure Loads.” Marine Technology, 38(1):9-25.
  • [15] Raviprakash A., Prabu B., and Alagumurthi N. (2012). “Residual ultimate compressive strength of dented square plates.” Thin-Walled Structures, 58:32 - 39.
  • [16] Xu M. C. and Soares C. G. (2013). “Assessment of residual ultimate strength for wide dented stiffened panels subjected to compressive loads.” Engineering Structures, 49:316 - 328.
  • [17] Zhang S., Kumar P., and Rutherford S. E. (2008). “Ultimate shear strength of plates and stiffened panels.” Ships and Offshore Structures, 3(2):105-112.
Birincil Dil en
Konular Mühendislik, Deniz
Bölüm Araştırma Makaleleri
Yazarlar

Yazar: Özgür ÖZGÜÇ
Kurum: ISTANBUL TECHNICAL UNIVERSITY
Ülke: Turkey


Tarihler

Başvuru Tarihi : 9 Haziran 2020
Kabul Tarihi : 25 Haziran 2021
Yayımlanma Tarihi : 9 Haziran 2020

Bibtex @araştırma makalesi { gidb880691, journal = {GİDB Dergi}, issn = {}, eissn = {2564-758X}, address = {İsatnbul Teknik Üniversitesi Ayazağa Kampüsü, Gemi İnşaatı ve Deniz Bilimleri Fakültesi Maslak/İstanbul}, publisher = {İstanbul Teknik Üniversitesi}, year = {2020}, volume = {}, pages = { - }, doi = {}, title = {NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL}, key = {cite}, author = {Özgüç, Özgür} }
APA Özgüç, Ö . (2020). NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL . GİDB Dergi , (18) , . Retrieved from https://gidbdergi.itu.edu.tr/tr/pub/issue/60340/880691
MLA Özgüç, Ö . "NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL" . GİDB Dergi (2020 ): <https://gidbdergi.itu.edu.tr/tr/pub/issue/60340/880691>
Chicago Özgüç, Ö . "NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL". GİDB Dergi (2020 ):
RIS TY - JOUR T1 - NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL AU - Özgür Özgüç Y1 - 2020 PY - 2020 N1 - DO - T2 - GİDB Dergi JF - Journal JO - JOR SP - EP - VL - IS - 18 SN - -2564-758X M3 - UR - Y2 - 2021 ER -
EndNote %0 GİDB Dergi NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL %A Özgür Özgüç %T NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL %D 2020 %J GİDB Dergi %P -2564-758X %V %N 18 %R %U
ISNAD Özgüç, Özgür . "NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL". GİDB Dergi / 18 (Haziran 2020): - .
AMA Özgüç Ö . NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL. GİDB Dergi. 2020; (18): -.
Vancouver Özgüç Ö . NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL. GİDB Dergi. 2020; (18): -.
IEEE Ö. Özgüç , "NON-LINEAR FINITE ELEMENT ANALYSIS OF DECK, BOTTOM AND INNER BOTTOM PANELS IN FPSO VESSEL", GİDB Dergi, sayı. 18, Haz. 2020